Reversing Door - Electrolux 136936003 Instructions D'installation

14

Reversing Door

1. Protect flat work surface, such as top of
dryer or floor near dryer, with a soft cloth
or towel.
2. Open dryer door and remove the two
hinge screws. Remove lower screw first,
then upper screw.
3. Gently place dryer door face down on flat,
covered work surface.
4. Locate the 12 screws (no. 1-12) on the
inner door ring. Remove and save these
12 screws.
5. Separate inner door ring from the rest of
the door.
6. Release the door switch striker and move
it to the opposite location and reinstall.
Set the inner door ring aside.
2
1
7. Lift the inner lens and set it aside.
8. If your model has 8 screws securing the
outer lens in place, remove and save them
for later. Lift and rotate the outer lens
180°. Lower the outer lens back in place.
180
9. Reinstall the 8 screws if removed in
previous step. If no screws were present,
move to next step.
3