Removing Battery - Hoover SmartWash Pet Complete Guide D'utilisation

Tools and Accessories
How to Use the Pretreat Wand
1
With the Spot Chaser
Pretreat Wand installed
into the machine, press
both latches and pull
down to release
Pretreat Bottle.
2
Unscrew cap and fill
with a HOOVER® spot
treatment. (See page 9
instructions).
3
Reinstall Pretreat Bottle
by pressing the bottle
up into the Spot Chaser
handle grip.
4
Press and release the
"Wand Release" button
next to the Spot Chaser
Wand. Next, pull the
wand out.
5
Press the button
on the front of the
Spot Chaser wand
to dispense Pretreat
solution.
6
Wait 5-10 minutes before
using SmartWash over
the treated areas.
NOTE: Install two AAA batteries before use.

REMOVING BATTERY

1
Remove battery by
removing screws with a
phillips head screwdriver.
2
Use 2 AAA batteries.
3
Replace battery door.
+ +
AAA AAA
- -
19