Hoover SmartWash Pet Complete Guide D'utilisation page 16

Maintenance
How to Change and Clean Brushes
HOW TO REMOVE
1
To prevent possible
leaking, remove Clean
Water Tank, Dirty Water
Tank and Solution Tank.
2
With handle in upright
position, follow "Nozzle:
How to Remove and
Clean" instructions
(page 15).
STORAGE
Before storing: Empty Clean Water Tank and let air dry. Replace on
cleaner. Empty Dirty Water Tank, clean filter of dirt/debris, rinse
tank and lid thoroughly with clean water and let air dry. Empty
Solution Tank, rinse tank with clean water and let air dry.
Allow brushes and underside of carpet cleaner to air dry thoroughly
before storing carpet cleaner on a carpeted or wood surface.
16
WARNING
!
Risk of personal injury – Brush roll may suddenly
restart – unplug before cleaning or servicing.
3
Grab Side A and pull up
to remove. Repeat on the
other brush.
4
The brushes can be
cleaned under running
water.
CORD STORAGE
Wrap the power cord around the cord hooks for convenient storage.
Attach the plug end to the cord.
!
HOW TO REPLACE
1
A
2
LUBRICATION
The motor and brush rolls are equipped with bearings which contain
sufficient lubrication for their lifetime.
The addition of lubricant could cause damage. Do not add lubricant
to motor bearings or brush rolls.
At an angle, align side
B on the brush to the
drive gear.
B
Press Tab A down until
brush snaps in place.
A