Securing Child; Toddler Mode; Detach Soft Goods - Nuna rebl Mode D'emploi

Toddler Mode

(Forward Facing Mode)
Forward Facing Child height 80cm-105cm/Child weight
Recline position Position 1-7
1 Press the rotating button to rotate the seat facing the vehicle's
(24)(25)
moving direction.
Please recline the seat to be in the 7
rotation.
2 Forward facing mode assembled as
The ISOFIX connectors must be attached and locked onto
the ISOFIX anchor points.
The load leg must be installed correctly with green indicator.
(25)-2

Securing Child

After the child is placed into the seat, check whether the Shoulder
Harness Straps are at the proper height.
1 While pressing the adjustment button located at the front of the
child restraint, pull the two Shoulder Harness Straps of the child
(18)
restraint.
2 Unlock the buckle of the harnesses by pressing the red button.
(19)
25
≤
19.5kg
th
position for ease of
(25)
(25)-1
(26)
3 When installing the child restraint in the toddler mode, do not
use the infant insert.
4 Fix the buckles on the both sides of seat to make placing the
(20)
baby more convenient.
5 Place the child into the child restraint and lock the buckle.
(22)
Please refer to.
6 Tighten the shoulder harness straps by pulling the adjustment
(27)
webbing.
Make sure the space between the child and the Shoulder
Harness Straps is about the thickness of one hand.

Detach Soft Goods

1 Open the buckle, then remove the infant insert.
(28)
2 Open the snaps.
3 Push the crotch strap through the crotch strap opening.
4 Move the shoulder belt behind the head support.
5 Detach the hook and loop fasteners to remove the shoulder
(32)
belt cover.
6 Unfasten the elastic on the bottom of headrest to remove the
(33)
head support soft goods.
(34)
7 Remove the soft goods.
To assemble winter and summer soft goods according to reversed
steps above.
(29)
(30) (31)
26