Securing Child In Carrier - Nuna pipa Mode D'emploi

Masquer les pouces Voir aussi pour pipa:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Securing Child in Carrier

1
- Loosen harness by pressing on adjuster button
while pulling on the harness straps.
2
- Press button to release the buckles. Separate
chest clip and spread harness straps apart.
3
- Place child in carrier in seated position, resting
the child against both the back and bottom of
the seat.
4
- Gently guide child's arms through harness
loops. Insert buckle tongues into buckle. Listen
for clicks. Pull on buckle to verify it is latched.
5
- Snap the chest clip together and temporarily
slide towards buckle for tightening of harness.
24 PIPA instructions

Publicité

Table des Matières
loading

Table des Matières