Ceiling Mounting - Eneo IPP-83A0036MIA Guide D'installation Rapide

Ceiling Mounting

The ceiling mounting plate must be attached to a structural object such as concrete that
will support the weight of the mount and dome camera.
8
Plastic anchors (3x)
Ceiling Mount (1x)
Set Screw (2x)
Locking Nut (1x)
Tapping Screws 8x35 (4x)
Socket (1x)
Safety Wire
Machine Screw M5x6 (1x)
Pipe (1x)
Socket Pipe_PF 1.5 inch (1x)
Set Screw (3x)
Adapter_PT 1.5 inch (1x)
Set Screw (1x)
1. Select a suitable mounting
location and verify there is suf-
ficient cable to connect with
cables from the housing.
2. Mark and drill mounting holes
on the surface using the ceil-
ing mount bracket.
3. Pull out cables required to
connect to the dome camera
from the ceiling.
4. Attach the ceiling mount
bracket using plastic anchors
and screws.
5. Attach 1.5 inch adapter to the
pipe and fix it using set screw
of the adapter.
6. Pull out camera cables
through the pipe and attach
the camera to adapter and fix
them using set screw of the
adapter.
7. Attach safety wire to the pipe
using 6x35 screws of the ceil-
ing mount bracket.
8. Join every connectors and
organize cables.
9. Lock hexagonal nut of the
ceiling mount bracket to fix
camera attached pipe and
ceiling mount bracket.