KTM 63508910044 Instructions De Montage page 20

5 MOUNTING
5.1
8
Mounting
500576-01
500577-01
500578-01
500579-01
–
7
Remove screws .
–
8
Remove screws .
–
Take off the fender with the fork guards to the front.
–
9
Remove screws and take off the retaining bracket.
Info
Pay attention to the brake lines and the cable.
–
1
Position front fender . Mount screws
do not tighten yet.
The fender is evenly aligned to the front.
–
5
Tighten all screws .
Guideline
Screw, fender
–
Position left fork protector
(both included). Mount screws
ten yet.
–
7
Mount original screws
The fork protectors are evenly aligned to the front.
–
6
Tighten all screws and
Guideline
Screw, fork protector
5
(all included), but
M6x16 10 Nm (7.4 lbf ft)
2
and right fork protector
6
(included), but do not tigh-
, but do not tighten yet.
7
.
M5x17 5 Nm (3.7 lbf ft)
3