Operating Specifications - Manfrotto 522P Instructions

PRECAUTIONS
Water resistivity
We put a lot of attention into on making the controller as water resistant as possible, however we cannot guarantee 100% water resistance under all circumstances
and you should avoid using the controller in conditions like rain and 95%+ humidity level.
High temperature
Avoid temperatures exceeding +70°C – do not leave the controller exposed to direct strong sunlight (e.g. in the car parked in sunny place).
Electrical precaution
The cable is always one of the most breakable elements of any electronic system, especially when as exposed to mechanical wear.
Therefore to extend the life of your controller and make basic "repair" as easy as possible we have made the cable exchangeable.
However, to avoid accidental short circuit of the camera LANC connection, you must remember to always plug the cable to the controller before plugging it into the camera.
We advise you to not to remove the cable from the controller, unless strictly necessary.
Batteries
In order to prevent accidental leakage, we recommend to use new and high quality batteries.
Always remove batteries when the controller will not be used for a long period of time (i.e. few weeks).

OPERATING SPECIFICATIONS

Operation temperature range -20° - +70°
Storage temperature range -30° - +80°
Humidity rel. (non condensing) max. 95%
Power consumption:
• 'analog' mode with batteries 190µW max
• 'digital mode' (19,2mW max, 6,2mW min.)
Power supply min: 3,1V
Power supply max: 5,0V
Battery specifications: 3 x LR6 AA 1,5V (recommended alkaline)
DISCLAIMER
The information contained in this document is subject of change without notice. Manfrotto makes no warranty and shall not be liable for any information errors contained
in this document.
AG-DVX100 and AG-DVC80 and the Panasonic name are trademarks of Matsushita Electric Industrial Co. Ltd.
7