PCE PMI 3 Mode D'emploi page 9

6. Menu
The operating menu allows for changinge alarm thresholds for the respective measurement scales and
selecting at language. To access the operating menu, press and hold down the "SELECT MATERIAL"
and "SELECT DISPLAY" buttons. Use the "SELECT MATERIAL" and "SELECT DISPLAY" but-
tons to navigate the menu. Use the "ON" switch to change menu levels and to confirm the settin-
gs. CAUTION! Critical parameters are protected against unintended modification with the use
of an additional warning and request for confirmation. To navigate to the parent menu, press
"Back" and briefly press the "ON" button. To exit to the main window, confirm the "Back" option of
the top level menu.
PCE-PMI 3 in menu modes.
1 - Select the previous menu item or decrease a value; 2 - Confirm the selected
option or value; 3 - proceed to the next menu item or increase a value.
7. Alarm
Exceeding the set value will trigger a sound alarm. For each scale an individual alarm threshold can
be set. Alarm thresholds are set in the operating menu. To change the setting for the material of choice,
select the "Alarm Level" item in the operating menu and press the "ON" button. After selecting the
scale, press the "ON" button once again to set the alarm threshold. After changing the alarm threshold,
confirm the value by pressing the "ON" button. To protect against accidental changes, it is necessary
to confirm the action by pressing the „ON" button once again. To cancel the change, press the "SE-
LECT MATERIAL" button. Alarm thresholds are stored in the memory, even if the batteries are remo-
ved. If the "Factory Settings" (Werkseinstellungen) option is selected, all the changes will be replaced
with the factory settings.
PCE Deutschland GmbH
D-59872 Meschede | Im Langel 4
Tel: +49 (0)2903-97699-0 | Fax: +49 (0)2903-97699-29
www.pce-instruments.com