English; Guarantee And Liability; Customer Service Of The Manufacturer; Declaration Of Incorporation - Nice Patio Instructions Et Avertissements Pour L'installation Et L'utilisation

1 5 GUARANTEE AND LIABILITY

The guarantee periods specified in the manufacturer's General Terms
& Conditions of Sale and Delivery apply. The Terms & Conditions of
Sale and Delivery are part of the sales documentation and are given
to the operator at the time of delivery. Liability claims for personal
injury and damage to property are excluded if they can be attributed
to one or more of the following causes:
– The customer opening the device (breaking the seal)
– Improper use of the device
– Improper installation, commissioning or operation of the device
– Structural modifications to the device without the written approval
of the manufacturer
– Operation of the device with incorrectly installed connections, de-
fective safety devices or incorrectly fitted safety and protection de-
vices
– Non-compliance with the safety regulations and information provid-
ed in these installation instructions
– Exceeding the limits of the technical specifications

1 6 CUSTOMER SERVICE OF THE MANUFACTURER

The device may be repaired only by the manufacturer in the event of
a fault. The address for sending the device to the customer service
department can be found on the inside of the back cover.
If you have not purchased the device directly from elero, please con-
tact the manufacturer of the machine or the supplier of the device.
Mechanically secure the machine before dismantling the device. The
device must not be separated from the machine by force.
Please have the serial number ready on request
from customer services This can be found in the
top right-hand half of the type plate

1 7 DECLARATION OF INCORPORATION

The Declaration of Incorporation in accordance with 2006/42/EC is
4 – ENGLISH
available to download online at www.elero-linear.de in the Service
area.
2

SAFETY

2 Safety

2 1 GENERAL SAFETY NOTICES

These installation instructions contain all of the safety information that
must be observed in order to avoid and prevent hazards when work-
ing with the device at any stage in its individual life cycles. Safe use
of the device is guaranteed when all the safety information provided
is adhered to.

2 1 1 Formulation of safety information

The safety notices in this document are marked with safety symbols
and formulated in accordance with the SAFE principle. They contain
specifications relating to the type and source of danger, the possible
consequences, as well as the prevention of the danger.
The following table provides the illustrations and descriptions used in
these installation instructions to indicate the levels of danger and the
potential physical injuries arising from them.
Symbol Keyword
DANGER
WARNING
Meaning
Warns of an accident that will occur
if the instructions are not followed,
which can lead to life-threatening,
irreversible injuries or death.
Warns of an accident that may occur
if the instructions are not followed,
which can lead to serious, potential-
ly life-threatening, irreversible inju-
ries or death.