Care And Cleaning; Cleaning Agents; Catalytic Cooking Compartment Panels; Removing The Ceiling Panel - NEFF B9481N3 Notice D'utilisation

Care and cleaning

With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
:
Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
:
Risk of burns!
The appliance becomes very hot. Never touch the interior
surfaces of the cooking compartment or the heating elements.
Always allow the appliance to cool down. Keep children at a
safe distance.

Cleaning agents

Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
Do not use
harsh or abrasive cleaning agents
■
cleaning agents with high concentrations of alcohol
■
hard scouring pads and sponges
■
high-pressure cleaners or steam cleaners.
■
Wash new sponge cloths thoroughly before use.
Area Cleaning agents
Appliance exterior Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaners or
glass scrapers.
Stainless steel Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Remove flecks of limescale,
grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form
under such residues.
Special stainless steel cleaning
products suitable for hot surfaces are
available from our after-sales service or
from specialist retailers. Apply a very thin
layer of the cleaning product with a soft
cloth.
Aluminium and Glass cleaner:
plastic Clean with a soft cloth.
Area Cleaning agents
Enamel surfaces To facilitate cleaning, you can switch on
(smooth surfaces) the interior lighting and detach the
appliance door if necessary. Apply
commercially available washing-up
liquid or a vinegar solution with a soft,
damp cloth or chamois; dry with a soft
cloth. Loosen baked-on food residues
with a damp cloth and detergent.
We recommend using oven cleaning gel
if the oven is very dirty. This can be
applied to the affected area. Leave the
cooking compartment open after
cleaning to allow it to dry.
Self-cleaning Please see the notes in section:
surfaces Self-cleaning surfaces
(rough surfaces)
Door panels Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Glass cover for the Hot soapy water:
oven light bulb Clean with a dish cloth.
Seal Hot soapy water:
Do not remove. Clean with a dish cloth. Do not scour.
Shelves Hot soapy water:
Soak and clean with a dish cloth or
brush.
Accessories Hot soapy water:
Soak and clean with a dish cloth or
brush.

Catalytic cooking compartment panels

The catalytic cooking compartment panels are coated with
self-cleaning enamel.
The surfaces clean themselves while the oven is in operation.
Larger splashes will only be removed after the oven has been
used several times.
Self-cleaning surfaces
The side walls are covered with catalytic panelling. Never clean
these surfaces with oven cleaner. Slight discolouration of the
enamel does not affect automatic self-cleaning.

Removing the ceiling panel

For ease of cleaning, you can remove the ceiling panel.
9