Electrical Connection; Installation With A Single Shunt In Battery Mode; Installation With Multiple Shunts - Cristec BAT-MON-3.5 Manuel Utilisateur

3.3 E
LECTRICAL CONNECTION
The cables employed must be insulated, flexible and fire-resistant. It must be multi-conductor cables
with minimum section of 1mm².

Installation with a single shunt in battery mode

3.3.1

Installation with multiple shunts

3.3.2
Figure 1 : Typical installation to monitor the battery capacity with shunt #1 (Battery Mode)
Figure 2 : Typical installation with shunt #1 in Battery Mode and shunt #2 in Energy Mode
26