Overview Presentation; Operating Principle; Scope Of Delivery - Cristec BAT-MON-3.5 Manuel Utilisateur

2

OVERVIEW PRESENTATION

2.1 O
PERATING PRINCIPLE
With the battery monitor BAT-MON-3.5 you are able to monitor your complete battery system and the current flow of
d.c. energy sources such as solar panels. The battery monitor can only be operated in conjunction with the shunt
reference SHUNT-300-3.5 at low voltage DC 8-32V. Up to 3 shunts (#1, #2 and #3) can be connected to the battery
monitor. The shunts can operate in two different modes :
•
Battery mode: Voltage, charging and discharging currents are monitored and from this the battery status is
computed. The battery is constantly monitored for full charge, critical state of charge and deep discharge.
•
Energy mode: The current flow of energy sources such as alternators, solar cells or hydrogenerators is
measured and the energy yield counted in Ampere hour (Ah).
2.2 S
COPE OF DELIVERY
The BAT-MON-3.5 is made up of :
• Battery Monitor 3,5'' (Ref. SEEL017151)
• 300 Amps shunt (Ref. SEEL017152)
• 3 poles plug-in connector for monitor supply (Phoenix Contact MVSTBR 2,5/ 2-ST – 1792016)
• 2 poles plug-in connector for relay (Phoenix Contact MVSTBR 2,5/ 3-ST – 1792029)
• 6 poles plug-in connector for shunt (Phoenix Contact MCVR 1,5/6-ST-3,5 – 1863194)
• Red plus lead (+1 main voltage line) with M10 round terminal + fuse holder with fuse 1A, length 20cm
• Red plus lead (+2 additional voltage line) with M10 round terminal + fuse holder with fuse 1A, length 20cm
• Fuse holder with fuse 1A for Battery Monitor supply
• 4 screws
• This user manual
• A specific packaging
Optional accessories (not included):
• Temperature probe (Ref. STP-NEW-2.8 or STP-NEW-5.0)
• Additional 300 Amps shunt (Ref. SHUNT-300-3.5)
• Quick startup wiring kit (Ref. SEEL017153)
Shunt #1 operates into Battery mode only.
24