Grounding Instructions; Switch Instructions - Weston 01-0103-W Mode D'emploi

GROUNDING INSTRUCTIONS

GROUNDING
This appliance must be grounded while in use
to protect the operator from electrical shock.
The appliance is equipped with a 3-conductor
cord and a 3-prong grounding type plug to fit
the proper grounding-type receptacle. The
appliance has a plug that looks like Figure
A. An adapter, Figure B, should be used
for connecting Figure A plugs to two-prong
receptacles. The grounding tab which extends
from the adapter must be connected to a
permanent ground such as a properly grounded
outlet box as shown in Figure C using a metal
screw.
EXTENSION CORDS
Use only 3-wire extension cords which have
3-prong grounding-type plugs and a 3-pole
cord connector that accepts the plug from the
appliance. Use only extension cords having
an electrical rating not less than the rating of
the appliance. Do not use damaged extension
cords. Examine extension cord before using and
replace if damaged. Do not abuse extension
cord and do not yank on any cord to disconnect.
Keep cord away from heat and sharp edges.

SWITCH INSTRUCTIONS

WARNING! Before cleaning, assembling or disassembling the Motor
Attachment, make sure the Motor is in the OFF Position (O) and the
PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!
.
The 2-Speed Motor has a Selector Switch
that has two speed settings. The first speed
is the slow speed, marked "I", the second
speed is the fast speed is marked "II". The off
position is marked "O". Figure 1
.
The 2-Speed Motor also has a Pulse
Button. Pressing this button will engage the
2-Speed Motor in its slow speed until you
release the button. It allows rapid starting and
stopping of the 2-Speed Motor (Figure 6).
Grounding
Prong
Circuit
Grounding
Conductor
Metal
Grounding
Screw
Cover of
Grounded
Outlet Box
Grounding
Means
AA2220
Pulse
Button
Selector
Switch
FIGURE A
FIGURE B
FIGURE C
FIGURE 6
7