Technical Specifications; Subwoofer - Focal DSA 500 RT Manuel D'utilisation

PERFORMANCE EXPERT DSA 500 RT
U s e r m a n u a l

8. Technical specifications

RMS power– 14.4V - 4 Ω - THD+N < 1% (CEA 2006)
Stability under 2 ohms
Maximum power– 14.4V - 4 Ω
Frequency response (digital filters off/-3 dB)
Minimum sound signal ratio (expander off)
Distortion - 4 Ω - @1 kHz (with a 22 kHz low-pass filter)
Crosstalk - 4 Ω - @1 kHz
Equalizer
Adjustable high-pass filter
Time setting range (delays)
Delays step
Compressor
Expander
RMS power– 14.4V - 4 Ω - THD+N < 1% (CEA 2006)
Maximum power– 14.4V - 4 Ω
Frequency response (acoustic/digital filters off/-3 dB)
Equalizer
Adjustable subsonic filter
Adjustable low-pass filter
Time setting range (delays)
Delays step
Compressor
Low-level inputs sensitivity
High-level inputs sensitivity
PWM frequency
Fuses
Idling current (product on, no signal)
Consumption current OFF
Remote control unit
Preamplifier stereo output
Protections
Weight
Dimensions
Satellite channels
2 x 65 watts
ü
2 x 120 watts
45 Hz-22 KHz
81 dBA
0.07% between 8 and 45 watts
>70 dB
7 fully configurable bands
45 Hz-300 Hz
0-20 ms
0.01 ms
ü
ü

Subwoofer

1 x 165 watts
250 watts
45 Hz – 140 Hz
7 fully configurable bands
20 Hz-60 Hz
80 Hz-200 Hz
0-130 ms
0.01 ms
ü
General
0.2 V - 5 V
0.4 V - 10 V
384 KHz
2 x 15A
0.9 A
0 A
ü
ü
Short circuit/low impedance/polarity inversion/DC/drop in voltage/heat protection
13 kg / 28.7 lbs
L x H x W: 60 cm x 21 cm x 31 cm / 23.6 x 8.3 x 12.2 inches
16