Specifications - Cuda surgical Elite 1000 Mode D'emploi

soaking/disinfectant solution and dried before plugging into the lightsource receptacle. Ensure
the optical surface is clean before connecting the cable to the lightsource.
Caution
distance from the headlight module to the patient is not less than 12 inches (30.5 cm). If using
less than 12 inches from the patient, the light intensity must be reduced.
Caution
an unacceptable risk.
lightsource) should be made to reduce the risk.
Caution
end-user follow all accessory or attachment instructions which could affect illuminator setup,
usage and/or settings.

3. SPECIFICATIONS

Item
Lamp type
Power
Color temperature
Lamp life
Lamp replacement
Light guide adapter
Brightness control
Input voltage
Power consumption
Regulatory Approvals
Equipment Class
Mode of Operation
Water Resistant
Operating Environment
Temperature
Relative Humidity
Air Pressure
Storage Environment
Temperature
Relative Humidity
Air Pressure
Dimensions, mm (inch)
Weight, kg (lb)
®
LIT-217 CUDA SURGICAL
(English)
When using high intensity lightsources at full output, the recommended
User is responsible for determining if interruption of light output will create
If this determination is made arrangements (such as a standby
Use of this illuminator with accessories or attachments requires that the
Specification
Ceramic type 300 watt Xenon
300 Watt
5600º K
1000 hours (typical)
Cartridge replacement from the side of the unit
Turret type to accommodate standard Storz, ACMI, Wolf,
Olympus cable endtips
Mechanical progressive shutter control from the front panel
100-120 V AC, 50/60 Hz
220-240 V AC, 50 Hz
450 watt max
UL60601, EN 60601-1, EN 60601-1-2, CAN/CSA, C22.2,
No 601.1-M90
BF-type
Continuous operation
Not Protected Equipment, IPX0
+20° to +40° C (68° to 104° F)
30 to 85%
700 to 1060 hPa
-20° to +60° C (-4° to 140° F)
0 to 95%
700 to 1060 hPa
338 (13.3)Width x 155 (6.1)Height x 457 (18)Depth front-to-back
10kg (22lb)
Rev. A
Date of Revision:
Page 5 of 66