Shure ANIUSB-MATRIX Guide De L'utilisateur page 7

Example: Connecting Loudspeakers, Wireless Microphones, and a Computer
control RF audio gain
A B
OL
ULXD4
ENTER OL
Digital Wireless Receiver
EXIT
IR SCAN
push
1. Connect analog equipment (such as loudspeakers or wireless microphone systems) to
the analog input and output. Refer to the hardware section in this guide for information on
connections and LED metering.
2. Connect a computer to the USB port
3. In the ANIUSB-MATRIX web application, open the matrix mixer to make connections
between devices.
Note: Some connections are established in the matrix mixer by default. Refer to the
matrix mixer help topic in the web application for additional information.
4. In the ANIUSB-MATRIX web application, adjust input and output levels and perform a
sound check. Refer to the help topics in the web application for additional information.
Get More Information
Now that the basic setup is complete, you should have access to the web application and
be able to pass audio between devices. More comprehensive information is available online
and in the help section, including:
• Maximizing audio quality with the built-in
parametric equalizer
• External control system command strings
• Signal routing
• System scenario diagrams
The complete user guide is available at http://pubs.shure.com/guide/ANIUSB-MATRIX
sig/clip INPUT
in
out
power
usb
OUTPUT USB
power
network
network audio
encryption
• Software configuration
• Networking information
• Troubleshooting
• Replacement parts and
accessories
7
PoE
reset