Shure ANIUSB-MATRIX Guide De L'utilisateur page 11

Device 1
Align the holes as shown for securing up to three devices in the 19" rack tray.
Rack Ear Configuration
A combination of up to 3 Audio Network Interfaces can be mounted in a single 19-inch
rack space. The adjustable rack ears support mounting in a standard equipment rack or
underneath a table.
Standard 19" Rack Mount
1. Align the ears with the
mounting holes pointed
forward.
2. Install the two screws that
hold the ear to the tray as
shown.
Under-table Mounting
1. Align the ears with the
mounting holes pointed
upward.
2. Install the two screws that
hold the ear to the tray as
shown.
Installing Underneath a Table
1. Hold the tray in the desired location under a table
2. Use a pencil to mark the location of the mounting holes on the table.
3. Drill 4 holes for the screws. The diameter of the holes in the tray are 7.1 mm.
4. Install the components into the tray
5. Install with 4 screws to secure the tray underneath the table
Device 2
11
Device 3