Alecto AVM-500 Mode D'emploi page 73

• Never touch any non-isolated adapter cables,
unless the adapters are removed from the wall
socket.
INTERFERENCE-FREE:
• The signal of this AVM-500 is digitally coded.
This means you will never receive signals from
other devices, nor can the signal from your
camera(s) be received by e.g. your neighbours.
• In case the camera(s) or monitor is placed
in or in the close vicinity of electromagnetic
fields, the signal (images or sound) can be
slightly affected. If this happens, try a different
location for the camera(s) or monitor or move, if
possible, the source of the interference.
EAVESDROPPING/WIRETAPPING:
• Eavesdropping/wiretapping of the signals from
this video monitor is nearly impossible. Not only
must one be within range of the video monitor,
one also needs some very costly equipment.
RANGE:
• The AVH-500 has a range of up to 300 meters
in an open field and up to 50 meters indoors;
this range depends on local circumstances.
• When the units get out of range of each other,
the 'out of range' icon (
every minute several alert beep tones are
emitted. As soon as the camera and monitor are
back within range of each other, this warning
will stop.
DELAY IN IMAGES AND SOUND:
• The camera transmits the images and sound
to the monitor in digital blocks. The monitor
converts these signals back to a recognizable
image and a comprehensible sound. Therefore,
there is a small delay between the moment of
movement and making sounds and the display
and sounds of the monitor.
) will appear and
X
GB
73