Alecto AVM-500 Mode D'emploi page 72

GB
GENERAL:
• Thoroughly read the user's manual and follow
all indications.
• Never place the camera or monitor in wet or
humid room or environment.
•
Ensure adequate heat dissipation; never cover
the monitor, the camera and/or the power
adapter(s) and never place them directly next to
a heat source.
• Only use the supplied adapter(s); connecting
a different type of adapter will damage the
electronics.
• Make sure the adapter cables are free of any
damage and ensure nobody can trip or fall
because of these cables.
• Never dismantle the monitor, the camera and/or
the power adapter(s); only qualified personnel
is authorized to do so.
BATTERY:
The battery starts charging as soon as you connect
the monitor to the power adaptor and insert this
adaptor into a 230V wall socket.
• You may leave the adaptor connected at all
times; the charging circuit for the battery is
controlled electronically and there's no risk of
overcharging.
• However, if you don't use the set for a longer
period of time (>2 months), we recommend you
to remove the adaptor from the wall socket and
take out the battery from the monitor. When using
the set again, first properly charge the battery.
INSTALLATION:
• Only connect or disconnect the power adapter
to/from the camera or monitor when the power
adapter is removed from the wall socket.
• Never install the AVM-500 during thunder
storms.
72
TIPS AND WARNINGS