Alecto AVM-500 Mode D'emploi page 61

MONITOR
Battery:
1. Open the battery compartment by sliding and
clicking off the battery cover at the rear.
2. Connect the battery plug in the battery compart-
ment according to the drawing in the battery
compartment and install the battery.
3. Click the battery cover back onto the monitor.
Never connect the plug or install the battery by
force.
Only install the supplied rechargeable Li-ion
battery (3.7V, 1440mAh).
Power adapter:
1. Connect the other 5V power adapter on the left
side of the monitor.
2. Insert the adapter into a 230V wall socket.
The battery starts charging as soon as you connect
the power adaptor. When using it for the first time,
please charge the battery for at least 15 hours,
even when the indicator shows a fully charged
battery.
Only use the supplied power adaptor.
General:
Fold out the support at the rear to place the monitor
onto a table or cabinet.
Keep the antenna of the monitor in an upright posi-
tion for optimal range.
The monitor is not water-proof, hence is only
suitable for indoor use.
GB
61