Alecto AVM-500 Mode D'emploi page 65

When the volume is turned off, the
pears in the upper part of the display to remind you
that you've switched off the sound.
find a description of these functions further in this
manual.
illuminates when the temperature alert is en-
abled. This symbol starts flashing when the set limit
is exceeded.
CAMERA:
Switching on/off:
Slide the ON/OFF switch at the rear to the ON posi-
tion to turn on and slide to the OFF position to turn
off. The green light underneath the ON/OFF switch
illuminates several seconds after you've switched
on the unit.
Automatic night vision:
The camera is provided with built-in infra-red LEDs;
these LEDs will switch on automatically when the
room turns dark and will switch of again when it
becomes light.
The LEDs can illuminate objects up to a
distance of approximately 6-8 meters.
When it's dark, that is when the night vision
LEDs are switched on, the images on the
monitor will be displayed in black and white.
Attention: infra-red light cannot be perceived
by the human eye; that means you cannot
tell whether the infra-red LEDs are switched on with
the naked eye.
Press the
open the menu. You'll
USE
symbol ap-
button to
GB
65