Alecto AVM-500 Mode D'emploi page 60

GB
CAMERA:
Power:
1. Connect one of the supplied 5V power adaptors
to the 5V DC input of the camera.
2. Insert the adapter into a 230V wall socket.
Only use the supplied power adaptor.
Table model or wall model:
You may place the camera loose on a table, cabinet
or desk or suspend it from a wall.
For wall mounting:
Drill two holes in the wall, next to each other and
at a distance from 2.1cm, then insert plugs and
screws. Leave the head of the screw protrude for
several millimeters.
Suspend the camera by sliding the recesses in the
camera support over the screws in the wall and
then pressing the camera somewhat downward. Fi-
nally, neatly hide the adaptor cable using cable-ties.
Tips for placement:
• For use as a baby monitor: place the camera
at least 1-1.5 meters away from your baby and
make sure to safely tuck away the adapter
cable.
• The temperature protrudes from the rear of the
camera. Make sure this sensor hangs freely,
unexposed to direct sunlight and avoid heat
from e.g. light bulbs.
• For optimal range, it is advisable to set up the
camera as high as possible, free from large
metal surfaces.
The camera is not waterproof and therefore
suitable for indoor use only.
60
INSTALLATION