Alecto AVM-500 Mode D'emploi page 66

GB
MONITOR:
Switching on/off:
press and hold for 2 seconds to turn off
Volume:
Use the + and - buttons to set the loudness of the
sounds from the room you placed the camera in.
While adjusting, the volume level will be indicated on
the display.
Talk-back function:
When the screen is enabled, press the
talk back to the camera. Press and hold the button
for as long as you're talking and release the button
to listen.
Sound indicators:
In the middle of the upper part of the display you'll
find 4 sound indicators indicating whether the cam-
era detects any sound.
Automatic on/off function: (VOX)
When the camera is not picking up any sounds,
you may have the display and sound of the monitor
switch off automatically and back on again as soon
as the camera detects sound.
The sensitivity of the automatic on/off function can
be adjusted (see chapter MENU further in this
user's manual). Use the VOX push-button to enable
or disable this function; the VOX indicator shows
whether this function is enabled or disabled:
VOX
66
VOX indicator
light off = VOX func-
tion off
(the images and
sound are transmitted
continuously)
button to