The resin lasts a short time.
Water leaks.
After changing the pretreatment,
the warning does not deactivate.
Reverse osmosis membrane may
be exhausted.
Failure in an equipment
connection.
The pretreatment counter has not
been reset
See recommended actions in problem The resin
lasts a short time.
Check the percentage of ionic rejection of the
membrane (See Section 12.2): If the percentage is
lower than 90% the membrane must be replaced by
a new one. To replace the reverse osmosis
membrane, follow the instructions in Section 11.3.
Contact the Technical Assistance Service (Contact
information in Section 0.3).
Reset the pretreatment counter (See Section
10.4.4).
29/31