Wasserlab Micromatic Mode D'emploi page 21

C

t
C
  
  
25
1 . 0 02 t 25
where C is the water conductivity in µS/cm compensated at 25°C, C is the water conductivity in µS/cm at a
25 t
temperature t and t the temperature of the water in °C at which the measurement is being carried out.
The Micromatic does not measure the water temperature and, by default, it assumes a water temperature of 25 °C.
If the user knows the water temperature, the user can modify the water compensation temperature value by another
value within a range between 5 and 35 ° C following the steps described in Section 10.4.1. In the main menu, the water
conductivity value will be compensated at 25 ° C.
21/31