Accessing The Control Unit Settings; Rapid Configuration - V2 SPA Zariss Manuel De L'installateur

7 - ACCESSING THE CONTROL
UNIT SETTINGS
Once initialisation is performed (even without time self-training), it
will be possible to access the various control unit functions,
including initialisation itself.
1. Press and hold the OK key until the display shows the menu
desired
2. Release the OK key: the display will show the first item in the
sub-menu
-CFG

Rapid configuration

-PrG
Programming the control unit (full menu)
-Cnt
Cycle counter
-APP
Self-training the working times
-dEF
Loading the default parameters
-ini
Control unit initialisation
8 - RAPID CONFIGURATION
Rapid configuration is a menu allowing the main control unit
parameters to be programmed with a few operations.
It is essential the initialisation procedure has already been
performed (even without time self-training) in order to
perform rapid configuration.
1. Press and hold the OK key until the display shows the
menu
2. Release the OK key: the display will show the first item in the
Pot
menu.
Pot.
Power adjustment
SEnS
Obstacle sensor adjustment
LoG.
Operation logic
FinE
Exit the menu
56
-CFG