Operation; Selecting Triggering Process - Prebena PKT-8-PR100 Traduction Des Instructions De Service D'origine

Operation

Operation

Selecting triggering process

The fastener driving tool has two triggering processes:
• Single triggering
• Contact triggering
With the tool turned on, select the triggering process on the control
panel:
Press "T" (1):
Press "TTT"
(2):
46
Single
triggering
Contact
triggering
WARNING
Accidental triggering while changing the triggering
setting may result in severe or fatal injuries.
▶ Do not point the fastener driving tool at yourself,
other people or animals.
The blue LED (3) is lit
continuously.
The blue LED (3) flashes.