Prebena PKT-8-PR100 Traduction Des Instructions De Service D'origine page 113

• Transport and store the compressed air cartridge only in the
original packaging or in the transport case of the fastener driving
tool.
• Remove the compressed air cartridge every time after the tool is
filled. Do not transport the tool with the cartridge inserted.
Unscrewing the protective plug
The tool is delivered with a protective plug screwed into the thread
for the compressed air cartridge. The protective plug protects the tool
against penetration of dirt and the thread against damage.
▶ Screw the protective plug (1) out of the thread (2):
ATTENTION!
Danger – damage to the tool.
If the tool is operated without the protective plug,
dirt and moisture can penetrate and damage the
thread.
▶ The protective plug should normally be left
inserted.
▶ Unscrew the protective plug only when you
have to screw in the compressed air cartridge
and screw it back in afterwards.
Before operation
33