Prebena PKT-8-PR100 Traduction Des Instructions De Service D'origine page 93

Follow all charging instructions and do not charge the battery
pack or tool outside the temperature range specified in the
instructions. Charging improperly or at temperatures outside the
specified range may damage the battery and increase the risk of fire.
6. Service
Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Safety instructions for fastener driving tools
• Always assume that the tool contains fastener. Careless
handling of the fastener driving tool can result in unexpected firing
of fastener and personal injuries.
• Do not point the tool towards yourself or anyone nearby.
Unexpected triggering will discharge the firing of fastener and
personal injuries.
• Do not actuate the tool unless the tool is placed firmly against
the workpiece. If the tool is not in contact with the workpiece, the
fastener may be deflected away from your target.
• Disconnect the tool from the power source when the fastener
jams in the tool. While removing a jammed fastener, the fastener
driving tool may be accidentally activated if it is plugged in.
• Use caution while removing a jammed fastener. The
mechanism may be under compression and the fastener may be
forcefully discharged while attempting to free a jammed condition.
• Do not use this fastener driving tool for fastening electrical
cables. It is not designed for electric cable installation and may
damage the insulation of electric cables thereby causing electric
shock or fire hazards.
Preventing explosion hazards
Serious or fatal injuries possible due to explosion.
▶ Never use the fastener driving tool in places subject to a danger
of explosion.
▶ Never operate the fastener driving tool with oxygen or with any
other flammable gases or gas mixtures.
▶ Do not expose the compressed air cartridge to temperatures
above 100 °C.
Safety
13