Connections - Eneo MEB-64V2812M0A Guide D'installation Rapide

Connections

No. Type
1 DC Jack
6 BNC Jack
The camera must be installed by qualified service personnel in accordance with all local
and federal electrical and building codes.
• Connecting Video Output connector
Connect the video output (BNC) connector to the video input.
• Connecting the Power
Connect power of 12VDC for the camera.
When using a 12VDC adapter, connect the positive (+) pole to the '+' position and the
negative (-) pole to the '-' position.
Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source
only.
Description
Camera Power
Video Out
EN
9