Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. Initial Operation
c) Operation
Always pull the mains plug before filling the fog machine.
Never fill the machine with flammable liquids or add these to the fog liquid. Only ever use a
suitable water-based fog liquid (the CONRAD range features suitable fog liquid, see "Technical
Data").
Never tilt the fog machine. Fog liquid may leak out or enter the inside of the device, cause
damage there or injure the operator.
Make sure that no liquid enters the internal workings of the device when you are filling it with
fog liquid. This can lead to damage to the device and can cause deadly electrical shocks.
Make sure that the mains plug is not plugged in.
Unscrew the tank cover from the device and fill liquid into the tank.
Screw the tank cover firmly back into place.
Plug the connection plug of the remote control into the corresponding jack on the back of the fog machine.
Insert the mains plug into an earthed mains socket.
The device heats up as soon as it is connected to the mains voltage. The HEATING display lights up on the device.
The warm-up process takes about 4-5 minutes.
Once the device has reached operating temperature, the HEATING FINISHED display is lit as are both display
elements on the remote control. As soon as the above-mentioned display elements are lit, the device is ready
to make fog.
Press the fog button on the remote control to manually trigger the fog function.
Make sure that the tank never runs empty during fogging. If this happens despite your best efforts, remove the
fog machine from the power supply immediately and allow it to cool then refill the tank.
If no fog emerges, the device is still warming up or re-heating (the remote control display elements are not lit).
A slight continuation of fogging when the device is switched off or after unplugging is normal and does not indicate
a defect.
If you no longer require the device, remove the mains plug and let the device cool down.
Empty the tank if you are not going to use the device for a longer period. This prevents leaking of the fog liquid
during transport or storage.
21

Publicité

Table des Matières

Dépannage

loading

Ce manuel est également adapté pour:

59 12 63

Table des Matières