Disposal; Troubleshooting - MC Crypt A-900 Notice D'emploi

9. Disposal

Please dispose of the unserviceable device according to the current statutory requirements.

10. Troubleshooting

By purchasing this fog machine, you have acquired a product that has been designed according to state of the art
technology and that is operationally reliable.
Nevertheless, problems or faults may occur.
We would therefore like to describe how you can eliminate certain malfunctions yourself.
Please observe the safety instructions!
Suddenly there is no more fog production during operation:
• The device is re-heating. Once the heating process is complete, the device puts out fog again.
• The device is no longer connected to the voltage supply. Check the correct connection and the voltage supply
of the outlet.
• The fuse has been triggered/blown. Change the fuse as described. Should the fuse trigger/blow again, have the
device repaired in a specialised workshop.
• The tank is empty and needs refilling.
The device continues to produce fog for a short period of time after it is switched off/unplugged:
• This is not a defect. The remaining fog liquid in the fog output opening is evaporating.
Repairs other than those described above should only be performed by an authorised
specialist.
24