Installing The Body Height Meter - KERN and SOHN MPE Serie Mode D'emploi

9.4.1 Installing the body height meter

The force required to extend the telescopic body height meter may be adjusted using
to adjustment bolts on the stand (see the figure).
To do it, proceed as follows:

Hide the whole body height meter
completely in the stand.

Remove both plastic plugs in the
lower part of the stand.

Using an appropriate flat-head
screwdriver, set the desired force
with two adjustment bolts.
(When you use it frequently,
remember that the process must be
repeated after some time).
MPE-BAPS-e-2121 16