Overview Of Display; Basic Information (General); Proper Use - KERN and SOHN MPE Serie Mode D'emploi

5 Overview of display

Display Description
Stability display
Zeroing display
NET Net weight display
GROSS Gross weight display
HOLD HOLD function
BMI BMI function

6 Basic Information (General)

6.1 Proper use

These scales are used to determine the body weight in upright position.
The weighed person should be positioned in the middle of the scale pan and stand
still.
As soon as a stable weighing value is reached the weighing value can be read.
The scales are designed for long-term usage.
Determination of the body weight.
Use as „non-standalone weighing scale", that is, the person carefully stands in the
middle of the scale pan.. Once a steady display value is shown, you can read the
weight value.
The weighing platforms are fitted with an anti-slip surface that must not be covered
during weighing a person.
The balance should be checked for correct condition prior to each utilisation by a
person familiar with proper operation of the balance.
MPE-BAPS-e-2121
Description
Scales are in a steady state
Should the balance not display exactly
zero despite empty weighing plate, press
the
to zero after a short standby time.
Illuminated when net weight is displayed
Illuminated after weighing scale was
tared
Illuminated when gross weight is
displayed
HOLD function active
Illuminated while BMI function is enabled
The weighing platform may only be stepped on by persons
capable of standing on both feet on the weighing platform.
button. Your balance will be set
10