Bose SOUNDTOUCH Mode D'emploi page 7

Program the remote control
Refer to the Universal Remote Control Setup Guide (provided)
for instructions on programming and using the remote control.
No audio?
Try these troubleshooting steps:
• Make sure the soundbar's HDMI cable is inserted into an
HDMI ARC or Audio Return Channel connector on your TV,
not a standard HDMI connector.
• If the soundbar is connected to your TV's HDMI ARC
connector, make sure that Consumer Electronics Control
(CEC) is enabled in your TV system menu. Your TV may
refer to CEC by a different name. Refer to your TV
owner's guide.
Note: CEC is fully enabled on the soundbar by default.
• Connect to the soundbar using both the HDMI cable
(inserted into your TV's HDMI ARC connector) and the
optical cable (see step 2).
For complete troubleshooting information, refer to the online
owner's guides:
global.Bose.com/Support/SSS
E N G L I S H