General Safety Precautions; General Working Stand Safety Warnings - Husqvarna DS150 Manuel D'utilisation

General safety precautions

WARNING! Read all safety warnings and
!
all instructions. Neglecting to follow the
warnings and instructions can lead to
serious injury or death for the operator
or others.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• People and animals can distract you causing you to
lose control of the machine. For this reason, always
remain concentrated and focused on the task.
• Do not use the machine in bad weather, such as
dense fog, heavy rain, strong wind, intense cold, etc.
Working in bad weather is tiring and can lead to
dangerous conditions, e.g. slippery surfaces.
• Never start to work with the machine before the
working area is clear and you have a firm foothold.
Look out for any obstacles with unexpected
movement. Ensure that no material can become loose
and fall, causing injury when operating the machine.
• Always check the rear side of the surface where the
drill bit will emerge when drilling right through. Secure
and cordon off the area and make sure that no one
can be injured or material damaged.
Personal safety
WARNING! There is always a risk of
!
crush injuries when working with
products containing moving parts.
Always wear protective gloves.
• Wear personal protective equipment. See instructions
under the "Personal protective equipment" heading.
• Never use the machine if you are tired, if you have
drunk alcohol, or if you are taking medication that
could affect your vision, your judgement or your co-
ordination.
• Never allow anyone else to use the machine without
first ensuring that they have read and understood the
contents of the operator's manual.
• Be careful as clothing, long hair, and jewellery can get
caught in moving parts.
• Never work alone, always ensure there is another
person close at hand. Apart from being able to receive
help to assemble the machine, you can also get help
if an accident should occur.
10 – English
OPERATING
Use and care
• Never use a machine that is faulty. Carry out the safety
checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. See instructions under the
Maintenance heading.
• Never use a machine that has been modified in any
way from its original specification.
• Keep all parts in good working order and ensure that
all fixtures are properly tightened.
Transport and storage
• Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
• Store the drilling machine and stand in dry and frost
free conditions.
General working stand safety
warnings
!
NOTICE! Save all warnings and instructions for
future reference.
• Disconnect the plug from the power source and/or
the battery pack from the power tool before
making any adjustments, changing accessories
Accidental starting of the power tool is a cause of
some accidents..
• Properly assemble the working stand before
mountinh the tool. Proper assembly is important to
prevent risk of collapse.
• Securely fasten the power tool to the working
stand before use. Power tool shifting on the working
stand can cause loss of control.
• Place the working stand on a solid, flat and level
surface. When the working stand can shift o rock, the
power tool or workpiece cannot be steadily and safely
controlled.
• Do not overload the working stand or use as
ladder scaffolding. Overloading or standing on the
working stand causes the stand to be "top-heavly" and
likely to tip over.
This stand is for Husqvarna DM machines. Only use
power tools designed for this stand.
WARNING! Read all safety warnings and
all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.