Forgotten Pin; Setting The Date And Time; Setting The Operating Times; Setting The Secondary And Tertiary Operating Areas - Grizzly MR 1000 Traduction De La Notice D'utilisation Originale

GB

Forgotten PIN

If you have forgotten your PIN, you can
reset it by generating a PUK.
1. Switch the on/off switch (5) to "ON"
(LSD display is off).
2. Simultaneously press the OK key (22)
and the power key (17)
3. Hold down the OK key (22) and power
key (17) for 4 seconds.
4. In the displayed menu, select "1 - Ge-
nerate PUK" and confirm the selection
with the OK key (22).
5. Forward the PUK displayed to the
Service Centre (see "Service Centre")
to restore your PIN.

Setting the date and time

1. Open the cover on the LCD display
(2).
2. Unlock the LCD display with the
4-digit PIN. This is set to "1-2-3-4" ex-
factory.
3. Use the arrow keys (20) to select the
"General settings" symbol and
confirm the selection with the
OK key (22).
4. Use the arrow keys (20) to navigate
to "Set date and time" and confirm the
selection with the OK key (22).
5. Change the date and time with the
number keys (16). You can navigate
to the individual positions with the ar-
row keys (20).
6. Confirm the entry with the OK key
(22).
7. Return to the main menu with the
back key (21).
The correct date and time setting
is required to ensure the correct
function of the operating time set-
tings.
92

Setting the operating times

1. Open the cover on the LCD display
(2).
2. Unlock the LCD display (23) with the
4-digit PIN.
3. Use the arrow keys (20) to select the
"Operating time settings" symbol
and confirm the selection with
the OK key (22).
4. Select the "Set operating times" option
and confirm the selection with the OK
key (22).
5. Set the automatic lawn mower's oper-
ating times by selecting the weekday
with the arrow keys (20) and navigat-
ing through the rows with the OK and
back keys.
6. Return to the main menu with the
back key (21).
Please note that the automatic
lawn mower's required operat-
ing time is influenced by charging
breaks and the condition of the
lawn area.
Setting the secondary and
tertiary operating areas
1. Open the cover on the LCD display
(2).
2. Unlock the LCD display with the
4-digit PIN. This is set to "1-2-3-4" ex-
factory.
3. Use the arrow keys (20) to select the
"General settings" symbol and
confirm the selection with the
OK key (22).
4. Use the arrow keys (20) to navigate
to "Secondary areas" and confirm the
selection with the OK key (22).