Personalize The Handset; Activation/Deactivation Of Beeps - Topcom BUTLER E450 Manuel D'utilisateur

6

Personalize the handset

Every programmation is confirmed at the end by a double or single long beep. A
double beep confirms the validation of your choice. A long beep signifies that the
modification has not been taken into account.
6.1 Adjusting the ring volume
Handset ring volume internal/external calls
The handset ring volume for internal or external calls can be set separately. You can choose from
5 handset ringer volume levels and "OFF".
When the handset is inside the base, the base will not ring during incoming call. So
when the handset ring volume is turned off and handset is inside the base, your
phone will not ring anymore!
6.2 Choosing the ring melody
The base and each handset can ring with a different melody. The handsets can ring with a different
melody according to whether the call is internal or external. You can choose from 5 different
ringer melodies:
6.3

Activation/deactivation of beeps

The handsets can emit a beep tone when a key is pressed, when the batteries are low or when the
handset is out of range.
Key pressed beep tone on/off
1 Enter the menu.
2 Select "HANDSET" and confirm.
3 Select "INT RING VOL" to change the internal volume or
"EXT RING VOL" to change the external volume and confirm.
4 Select a volume (1 to 5 or "OFF").
5 Confirm or return to the previous menu.
1 Enter the menu.
2 Select "SETUP" and confirm.
3 Select "HANDSET" and confirm.
4 Select "INT MELODY" to change the internal melody or
"EXT MELODY" to change the internal melody and confirm.
5 Select a melody (1 to 5).
6 Press the OK key to confirm or return to the previous menu.
1 Enter the menu.
2 Select "HANDSET" and confirm.
3 Select "BEEP" and confirm.
4 Select "KEYTONE" and confirm.
5 Select "ON" to activate or "OFF" to deactivate and confirm.
Personalize the handset
13