Answering Machine Settings - Topcom BUTLER E450 Manuel D'utilisateur

When you have activated Automatic base selection and the handset is out of range
on the current base, the handset will only search for the strongest base in standby
(not during communication).
9 Answering machine
The Butler E450 has a built-in digital answering machine with a recording capacity of 13 min. This
answering machine can be controlled by the base and by the handset. The answering machine can
be operated remotely and features the possibility of recording two outgoing messages (Message 1
and Message 2).
An internal voice will state various information, such as day and time of the call, as well as settings
such as VIP code, ring delay... The language available of the internal voice is indicated on the packing!
All messages and settings are stored on Flash-Memory and will not be erased when
the adapter is unplugged. Only the day/time settings will be erased.
9.1

Answering machine settings

Some settings can also be done on the base but most settings are controlled by the handset.
Setting the base speaker volume
To change the volume during playback of incoming or outgoing messages:
The volume can be set from 0 to 9. If the volume is set to the lowest position there will be no
audible output during call screening and during remote interrogation, but there will be a level 1
output for other operation.
Turning Answering Machine on/off
If the answering machine is on, the answering on/off LED
continuously (or blink when there are new messages) and the machine will automatically pick up
the line after a number of rings (see " Setting Number of Rings (Answer delay)" ). On the handset
the -icon will be show (or blink when there are new messages).
If the answering machine is Off, the answering on/off LED
icon will not been shown on the handset display.
To turn the answering on/off from the base.
To turn the answering on/off from the handset:
Even if the answering machine is off, the machine will automatically pick up after
10 rings in order to enable remote activation (see "9.3 Remote Operation" ).
Press the base volume keys to increase or to decrease.
1 Press the on/off key on the base to switch on the answering machine.
2 A voice confirms the setting and playback the active outgoing message.
3 Press the on/off key again to switch off the answering machine.
1 Enter the menu
2 Select "TAM SETTINGS" and confirm.
3 Select "ANS ON/OFF" and confirm.
4 Select "ON" or "OFF" and confirm.
Answering machine
on the base will light up
on the base will not lit and the -
19