Switch The Handset On/Off; Setting The Ring Volume Level On The Handset - Topcom Butler 2455 Mode D'emploi

HANDL. B2455_euro.qxd
Butler 2455

4.16 Switch the handset on/off

4.16.1 Switch the handset off
The handset is turned on.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
numbers, nor receive any calls.
Note : If you would like to leave the menu without turning off the handset, press the Delete/Mute key
4.16.2 Switch the handset on
The handset is turned off.
• Press the Programming key

4.17 Setting the ring volume level on the handset

You can change the ring volume of an incoming call. You have 10 levels. You can set the ring
volume of internal and external calls separately so you can hear a difference.
If you select level '0', the symbol
ring when an external call is received (you still hear it ring for internal calls).
Level '9' is the highest level. The telephone is set to level '5' by default.
4.17.1 Setting the ring volume for external calls (0-9)
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'EXTERNAL' appears on the display.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• The current volume level used appears on the display.
• Enter a number between 0 and 9 to select the desired ringer volume. Use the number keypad
to do this.
• Press the Programming key
4.17.2 Setting the ringer volume for internal calls (1-9)
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'EXTERNAL' appears on the display.
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• The current volume level appears on the display.
• Enter a number between 1 and 9 to select the desired ringer volume. Use the number keypad
to do this.
• Press the Programming key
27/2/03 9:01 pm
All manuals and user guides at all-guides.com
.
repeatedly until 'POWER OFF?' appears on the display.
. The telephone turns itself off. You cannot dial any more
. The telephone turns itself on.
appears on the display and you no longer hear the phone
.
repeatedly until 'RING SEL' appears on the display.
.
.
repeatedly until 'VOLUME' appears on the display.
.
to confirm your selection.
.
repeatedly until 'RING SEL' appears on the display.
.
repeatedly until 'INTERNAL' appears on the display.
.
repeatedly until 'VOLUME' appears on the display.
.
to confirm your selection.
17 17 17 17 17 17 17 17 17 17 17 17 17
Page 17
.