Accessories - Endress+Hauser iTEMP TMT122 Mode D'emploi

Presettable parameters
Expanded settings
Service functions

7 Accessories

Endress+Hauser
• Cold junction compensation (internal/external on TC connection)
• Temperature external (on TC with cold junction compensation external)
• Compensation resistance (0 to 30  on 2-wire connection
• Fault condition reaction (
• Output (analog standard/inverse)
• Damping (0 to 100 s)
• Offset (-9.9 to +9.9 K)
• TAG (Measurement point description)
• Identifier (Descriptor)
• Simulation (on/off)
• Reset/factory default
• Serial number (only display)
• Operation code (=release code 281)
®
For detailed ReadWin 2000 operating instructions please read the online
documentation contained in the ReadWin
 Communication interfaces Commubox FXA191 (RS232) or FXA195
(USB):
Order Code: FXA191-...; FXA195-...
 PC operating software: FieldCare or ReadWin
supplier when ordering.
®
ReadWin 2000 can be downloaded free of charge from the Internet from the
following address: www.products.endress.com/ReadWin
 
3.6 mA or 21.0 mA, > 21.5 mA is guaranteed)
®
2000 software.
®
TMT122
2000. Please contact your
17