Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Translation of the original instructions
Position the switch «OFF».
Unplug the black clamp, then the red one from the vehicle.
Recharge your GYSPACK AIR after use. (see 'Charging internal battery')
CHARGING INTERNAL BATTERY USING INTEGRATED CHARGER
The GYSPACK AIR is fitted with an automatic charger which maintains the internal battery fully charged without the
need for monitoring. When the battery is fully charged, the charger will automatically go into floating mode and stop
the charge. It will automatically restart when needed.
To recharge the GYSPACK AIR :
• Place the GYSPACK AIR in a vertical position during the charge.
• Plug in the power supply to an outlet 230 V and the other end on the front of GYSPACK AIR (n°2 fig p. 41).
• The green indicator indicates the charge that the GYSPACK AIR is over.
Nb : If the device stays more than 24 hours in charging mode (red LED, orange indicator on), then manually stop the
charge. The internal battery of your GYSPACK AIR is damaged.
USING THE GYSPACK AIR AS 12V DC POWER SUPPLY
The cigarette lighter plug is protected by an integrated 20 A circuit breaker. In the event of an
overheating due to an overcharge, the circuit breaker will stop the power supply.
Position the switch «OFF».
Open the lead of the cigarette lighter plug Remove cigarette lighter and plug lead into the hole (n°1 fig p. 65).
Plug your electrical device into the plug of GYSPACK AIR, using the proper cable (not included).
Estimated autonomy of GYSPACK AIR as a 12 V DC power supply
Device
Fluorescent cellular light
Radio, Fan, Echoprobe
Videocamera, light spot
Power tool, drying pump
Air Compressor, Car vaccum cleaner
SPOT-LIGHT
The GYSPACK AIR has an in-built spotlight comprised of 7 high intensity LEDs controlled by the «light» button (n°11
fig p. 65).
Repair should always be carried out by qualified personnel.

AIR COMPRESSOR

GYSPACK AIR integrates an 4 bars compressor, allowing to inflate :
• Tyres with their original valve. (press the lever to lock the hose on the valve).
• Balloons with thin end (included).
• Any other plastic objects (beach balloons, toys, air beds, etc.) with 2 special ends "connectors"
Usage
• Turn the GYSPACK AIR main switch to « off »
GYSPACK AIR
Estimated consumption (in watts)
4
9
15
24
80
Estimated automomy (in hours)
50
22
13
8
2
EN
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gyspack air 480aGyspack air 1250a

Table des Matières