Cooking In Manual Mode - Lancellotti ENFASI Manuel D'utilisation

Instructions for the user
USING AND PROGRAMMING THE OVEN'S ELECTRONIC ANALOGUE CLOCK
The electronic clock displays the time using analogue hands and allows the oven to be controlled
using the push knob and 4 LED lights.
The push knob is used to set the time, programme cooking start and end times, set the audible
alarm (in "Minute Minder" mode) and start/stop cooking manually.
SETTING THE TIME
Proceed as follows:
press the push knob 4 times until the
•
turn the push knob clockwise or anticlockwise to increase or decrease the time; the minutes
•
hand moves in 1-minute stages clockwise or anticlockwise.
The clock automatically exits time-setting mode 10 seconds after last turning the push knob.

COOKING IN MANUAL MODE

For using the oven without programming the electronic clock.
When the electronic clock is deactivated, the ovens may be used simply by turning the
appropriate control knobs (see the relative sections on p. 87 and 88).
PROGRAMMING COOKING END TIME
After programming the cooking end time, the oven will switch on immediately and turn off
automatically at the set time.
Proceed as follows:
press the push knob 2 times until the
•
turn the push knob clockwise or anticlockwise to increase or decrease the cooking time; the
•
minutes hand moves in 1-minute stages clockwise or anticlockwise. The
flashing for 10 seconds after last turning the push knob.
(WITH PUSH KNOB)
START COOKING
SET THE TIME
END COOKING
AUDIBLE ALARM / "MINUTE MINDER"
LED flashes;
LED flashes;
LED will keep
95