Removing And Cleaning The Inside Oven Fan; Replacing The Oven Light Bulb - Lancellotti ENFASI Manuel D'utilisation

Instructions for the user

11.3 Removing and cleaning the inside oven fan

The inside fan of the ventilated oven may require periodic cleaning. To disassemble the fan
proceed as follows:
Make sure that the power supply to the appliance is switched off.
•
Remove all inside components (dripping pan, shelves).
•
Loosen and remove the four screws A from the cover panel.
•
Remove the cover panel B.
•
Use a coin to loosen the fixing nut C of the fan (this threading is inverse; to loosen turn
•
clockwise).
Remove the fan D and wash it by immersing
•
it in warm water and dish detergent. Never
use abrasive or corrosive detergents,
powdered products, or metal scrubbers.
Rinse the fan and dry it thoroughly.
Re-fit the fan and the cover by working in the
inverse direction to the instructions for removal.

11.4 Replacing the oven light bulb

Before carrying out maintenance, switch off the power supply to the appliance.
Proceed as follows:
open the oven door;
•
unscrew the glass safety cap anticlockwise;
•
unscrew the bulb and replace it with another one for high
•
temperatures (300°C) with the following characteristics:
Voltage
Voltage
Power
Attachment
Refit the glass cap and switch on the power. It is possible to check that the oven light is
•
working even when the door is closed by turning the function switch knob to position
230 V / 50 Hz
230 V1N~ / 50 Hz
25 W (halogen bulb)
G9
.
123