Programming The Timer - Lancellotti ENFASI Manuel D'utilisation

The digital clock enables the oven to be set to automatically switch on and off.
This programmer works like a touch screen; rest the tip of the finger on the key for a few seconds
to activate it.
INITIAL POWER-ON AND SETTING THE TIME
When first powering on the appliance or following a power failure,
on the display. Touch the
(hold down the
To adjust the time under normal operating conditions, i.e. when the clock is already on, touch both
keys
MANUAL USE
This function is for using the oven without any programming.
It is always possible to switch from a programmed function to "Manuale" (Manual) function, by
touching the

PROGRAMMING THE TIMER

This function activates an audible alarm after a preset time, without interfering with the
operation of the oven.
The digital clock can also be used as a timer:
• touch the
symbol
• use the
The timer starts automatically and the symbol
an audible alarm sounds for 7 minutes and the symbol
• touch any key to stop the alarm or the
90
Instructions for the user
USING AND PROGRAMMING THE DIGITAL CLOCK ON TOUCH SCREEN OVENS
"Mode" key to stop the flashing and use the
/ keys to scroll rapidly).
/ simultaneously for at least two seconds and then set the time as described previously.
"Mode" key; choose "Manuale" if no cooking programmes are to be used.
"Mode" key for at least 2 seconds to enter the programming menu; the flashing
will appear;
/ keys to set the required time and the display will show the time remaining.
DECREASE KEY
MODE KEY
INCREASE KEY
will stop flashing. When the set time is reached,
will flash;
"Mode" key to delete the programme.
and the word AUTO flash
/ keys to set the time