Sunea 40 RTS DC
2.2.2.Wiring without connectors
2.2.2.1. Wiring with a solar panel and a battery
Wire the drive to a 12V NiMH battery (q) and a 12V
solar panel (r), following the figure:
- N = Blue wire
- L = Brown wire
The wires must have a minimum diameter of
2
0.75 mm
.
NOTICE
Battery specifications:
Output current: 5 A at 12V (starting current: 7 A during 400 ms with a voltage drop of 2V max.).
2.2.2.2. Wiring with an external power supply
Wire the drive to an external 12V DC regulated
power supply (s) with a fuse (t), following the figure:
- N = Blue wire
- L = Brown wire
The wires must have a minimum diameter of
2
0.75 mm
.
NOTICE
Power supply specifications (Safety Extra Low Voltage):
- Output voltage between 11.5V and 14V (±0.5V).
- Output current: 5 A at 12V (starting current: 7 A during 400 ms with a voltage drop of 2V max.).
Fuse: 3 Nm = 1.6 AT, 6 Nm = 3.15 AT, 10 Nm = 3.15 AT.
©
Copyright
2020 SOMFY ACTIVITES SA. All rights reserved.
5113030C_Sunea 40 RTS DC.pdf 7
r
q
N
N
L
L
s
N
N
L
L
t
10/19/2020 5:49:32 PM
EN
7