Lexicon Vortex Mode D'emploi page 36

Rate 1*, Rate 2
Depth 1*, Depth 2
Res 1
ROTARY 1
Fbk 2
ROTARY 2
Rate 1*, Rate 2
Depth 1*, Depth 2
Res 2
* ENVELOPE Increases DEPTH 1; decreases RATE 1
ECHO FX LVL Delayed rotary output level
MOD FX LVL Undelayed rotary output level
FEEDBACK 1 Gain of ECHO 1 to ECHO 2 cross-feed
FEEDBACK 2 Gain of ECHO 2 to ECHO 1 cross-feed
RATE 1 Rotary 1 and Rotary 2 speed
DEPTH 1 Rotary 1 and Rotary 2 depth
RESONANCE 1 Rotary 1 resonance gain
RATE 2 Rate of RATE 1 FM
DEPTH 2 Depth of RATE 1 FM
RESONANCE 2 Rotary 2 resonance gain
English
Mod Fx Lvl
Echo
Fx Lvl
ECHO 1
Fbk 1
ECHO 2
Echo
Fx Lvl
Mod Fx Lvl
33
Centrifuge B is designed around two rotary effects, one fed by
the left input, one by the right. The output of both rotary effects
is fed to echoes configured as a stereo pair with cross-feed.
The rotary efects always move in unison.
ENVELOPE decreases RATE 1 and increases DEPTH 1, so that
louder signals decrease the speed, while increasing depth. RATE 1
and DEPTH 1 control the speed of both rotary effects. RATE 2
controls the rate of RATE 1 FM . DEPTH 2 controls the depth of RATE
1 FM. (As you turn up DEPTH 2, RATE 1 will get faster and slower
at the speed of RATE 2, allowing you to create a rotary effect which
is constantly changing from slow to fast.)
The Preset uses envelope control to create a downward spiral
effect. Loud signals produce wide and slow rotation which speeds up
and narrows as the signal fades. (The preset has DEPTH 2 turned
off.)
B
4 CENTRIFUGE