Error Messages - CASO DESIGN B5 Mode D'emploi Original

3. Place the object(s) to be weighed on the scale's weighing platform. The total weight
will appear on the display.
ATTENTION
► This scale is intended to weigh items up to 11.02 lb/oz or 176.37 oz or 5000g in total
weight. Do not overload the scale or the sensor could be damaged.
3.6 To weigh items in tare mode
Tare Mode allows you to make allowances for the weight of objects on the scale you don't
necessarily want to weigh, such as a mixing bowl. It also allows you to re-zero the scale
with items already on the weighing platform, allowing you to accurately weigh additional
items separately.
 Make sure the scale is in the ready position and the display is lit.
 Press the "g/lb" button on the display repeatedly to cycle through weights in grams,
pounds or ounces.
 Place the first object to be weighed on the weighing platform.
 Press the "TARE" button to re-zero the display and weigh additional items.
 If the item you first weighed is a container, for instance, fill it with the second item to be
weighed and place it back on the scale to display the weight of the container's contents
but not the container.
 You can press the "TARE" button after adding as many additional items as you like to
re-zero the scale.
 When an item is removed from the weighing platform while in Tare Mode and the
display has been re-zeroed, the negative weight of the object will be displayed.
 To exit Tare Mode, remove all items from the weighing platform and press the "TARE"
button.

3.7 Error Messages

The following error messages may appear on the display to notify you of a potential
problem:
LO-1: The batteries in the display are low and need to be replaced.
LO-2: The batteries in the base are low and need to be replaced.
EEEEE: There is too much weight on the platform and the scale should be unloaded
immediately.
UNST: The scale or the objects being weighed are moving (unstable) or the weighing
platform is not level.
CASO B5 Baking Scale 10