Turning The Cooking Zone Off; Residual Heat Indicator; Combizone - Bosch HIS8655U Manuel D'utilisation

en-us Cooktop operation
¡ The cooktop may temporarily reduce the power auto-
matically to protect the fragile parts of your appliance
and to prevent the appliance from producing excess
noise.
7.2 Turning the cooking zone off
Turn the control knob to 0.
▶
a The residual heat is displayed on the cooking zone dis-
play until the cooking zone has cooled off.
a When all cooking zones are turned off, the cooktop on
indicator goes out. The cooktop is turned off.
7.3 Residual heat indicator
The cooktop is equipped with a residual heat indicator for
each cooking zone. The residual heat indicator lights up
when a cooking zone is turned off. Do not touch the cook-
ing zone when the residual heat indicator lights up.
Display Meaning
The cooking zone is hot.
The cooking zone is warm.
If you remove the cookware from the cooking zone during
cooking, the residual heat indicator and the selected
power level flash alternately.
7.4 CombiZone
Using this function allows the two left cooking zones to be
linked together into a single cooking zone, providing
greater cooking flexibility. When doing this the same
power level is set for both cooking zones.
Correct use of cookware for the CombiZone
For best results, use cookware that matches the size of
the two cooking zones. Place the cookware in the center
of the cooking zones.
Turning on the CombiZone
If a power level is set, turn the two left control knobs
1.
to 0.
18
Push and turn the left most control knob to combi zone.
2.
a A beep sounds.
and blink on the two left cooking zone displays.
a
a The CombiZone function is activated.
Setting the power level on the CombiZone
Push and turn the second to the left control knob to the
1.
desired power level for CombiZone cooking.
a Both cooking zone power levels are linked. Their status
is shown on the cooktop display.
You can adjust the CombiZone power level at any time
2.
by turning the second to left control knob.